Functions and features:
Single nail/double nail/reinforced nail can be nailed at one time (both ends are double nails and the middle part is single nail), which can meet the different needs of different customers for nail types;
Carton size and adjustment of carton nail distance can be completed in just one minute, which greatly saves time and is easy to operate;
Can be nailed with lids and cartons without lids (please specify when ordering the machine if there are boxes with or without lids to be nailed);
The front paper feeding part automatically counts, and the paper feeding table is equipped with a photoelectric sensor device, which automatically rises when feeding paper
The back section has an automatic counting function, and the number of finished products can be divided and sent to the end of the conveying machine according to the set number (1-99), which is convenient for packing and bundling;
Mechanical speed: 600 nails/min; suitable for three-layer and five-layer (specify when ordering seven-layer)
Head configuration:
The entire set of nail heads are made of die steel imported from Japan and precision processed by computer;
The head blade and low mold are made of German tungsten steel (wear-resistant);
Servo motor is brand motor
Single chip nail box machine electrical system
Serial number | Part name | Brand |
1 | Servo | Made in Europe |
2 | Reducer | Li Ming |
3 | PLC | Omron |
4 | Touch screen | Weiluntong |
5 | Switching power supply | Schneider |
6 | Protector | Schneider |
7 | Contactor | Schneider |
8 | Thermal protection | Schneider |
9 | Intermediate extension | Schneider |
10 | Terminal block | Zhengtai |
11 | Circuit breaker | Schneider |
12 | Proximity switch | Omron |
13 | Photoelectric switch | Omron |
14 | Push button switch | Schneider |
The above-mentioned devices are all 100% genuine devices, preventing counterfeiting and inferior products. | ||
2000 configuration: drive some electrical appliances
The domestic Orui double servo drive is precise and accurate, and the mechanical parts are reduced, which can effectively reduce the failure rate of the machinery.
Weiluntong touch screen operation, parameters, nail distance, nail number, nail type, rear baffle are convenient and quick to change. The entire control system adopts the Japanese Omron Plc control system. The rear electric baffle is driven by a stepping motor.
The photoelectric switch adopts Omron, and the proximity switch adopts the Omron brand.
Switching power supply Schneider.
The protector, contactor and thermal protection adopt Schneider.
The intermediate relay adopts Schneider brand.
Button switch Schneider.
The bearings used in this machine are Harbin original bearings. This machine is driven by a synchronous belt with low noise and low error. The synchronous wheel of the synchronous belt is made in Foshan, Guangdong. The slideway of the machine head is modulated by high-frequency quenching of ball-milled cast iron. The driving gear, driven gear, wire feed wheel, and wire press wheel are made of 40 Luo material, after quenching, quenching, fine grinding, and nitriding treatment, with high precision grinding. The punch is made of Japanese imported SKD11 material, and the nail mold is made of imported tungsten steel. The small parts of each part of the machine head are formed into fine grinding with high precision and small error. The motor adopts Shanghai Outer.
The bearing box used in this machine is the LK brand produced in Quanzhou, Fujian. (The above components are subject to change without affecting the quality of the machine without notice)
The universal motor and gear reducer used in this machine are from a well-known brand in the south. The transmission parts of this machine are all keyless connections, with high precision, low noise, small error and long life.
Maximum size（A+B)x2 | 3980mm | Minimum length A | 250mm |
Minimum size（A+Bx2 | 740mm | Maximum length D | 2000mm |
Maximum size (C+D+C) | 3000mm | Smallest scale D | 150mm |
Minimum size（C+D+C) | 250mm | Max tongue width E | 40mm |
Smallest flap C | 50mm | Maximum paper width | 900mm |
Maximum swing lid C | 560mm | Mechanical width | 2850mm |
Maximum width B | 850mm | Machine weight（T) | 2 |
Minimum width B | 120mm | Mechanical speed (nails/min) | 600 |
Maximum length A | 1140mm | Number of nails | 1-99 |
TAG:
Speeding Semi-Auto Stitcher
Share to:
Category:
Get A Quote
Note: Please leave your contact information and our professionals will contact you as soon as possible!
Related Products
FW-120T automatic horizontal waste paper baler
Double-cylinder hydraulic waste paper packer with back push
FW-120T automatic hydraulic waste paper baler
Double cylinder hydraulic waste paper press
Packaging machinery solutions,
Equipment and accessories for any industry.
Call Us On：
Tel: +86-15350765366
Dongguang county south industrial zone, cangzhou city, hebei province
Catalog