ⅰ、Structural features：
★ The surface of the heating plate is grinded, the width of the heating plate is 600mm, there are 16 heating plates, and the cooling and shaping are 4 meters long. The heating plate is made of container plate, which meets the national first-class pressure vessel standard, and is accompanied by a pressure vessel certificate and an inspection certificate.
★ The left and right correction adjustment of the upper conveyor belt adopts pneumatic automatic correction.
★ The heat conduction piping of the heating plate is divided into four sections to control the temperature, with a temperature display.
★ The upper cotton webbing adopts a double-cylinder S-type cotton webbing tensioning device.
★ The lower belt adopts pneumatic tensioning and pneumatic correction.
★ The surface of the drive roller is coated with wear-resistant rubber, which has a herringbone structure with a medium height to ensure a smooth output of the cardboard.
★ The main drive motor is a variable-frequency speed-regulating motor with large low-speed torque, wide speed range, reliable use and simple maintenance.
★ The inside of the hot plate is a partition isolation structure, so that the steam flows in an S-shaped direction, and the steam and water separation function is obvious, which improves the steam utilization rate.
ⅱ、Technical Parameters:
★ Temperature requirement: 160—200℃.
★ Steam pressure: 0.8-1.3MPa.
★ Air source pressure: 0.6—0.9MPa.
★ Cooling and shaping length: 4 meters.
★ Number of heating plates: 16 pieces.
ⅲ、Roller diameter parameters：
★ Diameter of the upper drive rubber roller: ￠700mm.
★ Diameter of the bottom drive rubber roller: ￠400mm.
★ Diameter of the front driven belt roller: ￠215mm.
★ Diameter of the driven belt roller after shaping: ￠215mm.
★ Diameter of pressing roller: ￠70mm.
★ The diameter of the shaping roller: ￠86mm.
★ The diameter of the upper belt tensioning roller: ￠155mm.
★ Diameter of the upper belt deviation adjusting roller: ￠130mm.
★ Diameter of the lower belt carrier roller: ￠130mm.
★ Diameter of the lower belt tensioning roller: ￠130mm.
Note: The surfaces of all rollers are hard chrome-plated after grinding.
ⅳ、Power motor parameters：
★ Main drive motor power: 30KW.
TAG:
Double Facer
Share to:
Category:
Get A Quote
Note: Please leave your contact information and our professionals will contact you as soon as possible!
Related Products
FW-120T automatic horizontal waste paper baler
Double-cylinder hydraulic waste paper packer with back push
FW-120T automatic hydraulic waste paper baler
Double cylinder hydraulic waste paper press
Packaging machinery solutions,
Equipment and accessories for any industry.
Call Us On：
Tel: +86-15350765366
Dongguang county south industrial zone, cangzhou city, hebei province
Catalog