1. Before starting the machine, it is necessary to check whether the parts of the baler are in good condition; Whether the screws and nuts of each part are loose, if any, they should be tightened in time. If there is a shortage of nails and caps, the repairman must be informed to deal with it in time.

2. Check the conveyor belt for any debris blockage. If there is debris, it must be cleaned with compressed air to blow away the dust in the guide rail.

3. Check whether the tool and slide plate parts are short of oil. If drip irrigation is not necessary, simmer the oil with a stick and slowly drop it on the top. Inverted method can not be poured into the feeding belt, otherwise it will be packed well. The belt will slide.

4. If abnormal phenomena are found during startup. For example: loud sound, big vibration, peculiar smell, etc. if it can not be found, the maintenance personnel should stop to deal with it, so as not to cause damage to the parts.

The last four points are the maintenance methods of automatic waste paper packer. When using the waste paper packer, please pay attention to the maintenance of the waste paper packer.

The automatic waste paper packer has the characteristics of good toughness, good stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment infrastructure engineering. It is widely used in various waste paper factories, old material recycling companies and other enterprises. It is suitable for packaging and recycling of used waste paper and plastic straw. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation cost. Automatic waste paper packer is widely used, but if the maintenance is not in place, there will be some small faults that affect the packaging process.