Costa-Rica Two-layer glue machine

All roller surfaces are hard chrome plated after grinding treatment.

Product Description

ⅰ、Structural features:

★ After the surface of the rubber roller is tempered and tempered, the inner hole is processed, and the dynamic balance surface is finely ground and engraved with a 32-line pit-type net pattern. The glue is evenly spread and the glue consumption is small.
★ The rotation of the glue roller is controlled by a frequency conversion motor and frequency conversion. The linear speed of the glue roller is synchronized with the double-sided machine by the frequency conversion control, and it can operate independently.
★ Digital display for electric adjustment of glue amount. Automatically circulate the glue supply, which can effectively control the amount of glue, avoid glue precipitation, ensure good glue and save glue.
★ All roller surfaces are hard chrome plated after grinding treatment.
★ Measure the speed signal of the double-sided machine to realize synchronous operation with it. The gluing machine adopts a man-machine interface display, which can be used for related data setting, and the operation is simple and fast.
★ Electrical design, production and construction technology follow national standards and specifications, with low failure rate and simple maintenance.

 

ⅱ、Technical Parameters:

★ Working width: 2200mm.
★ Operation direction: left or right (determined according to the customer's factory).
★ Design speed: 150m/min .
★ Air source system: 0.4—0.6Mpa.
★ The temperature range of the preheating cylinder: 150—200℃.
★ Steam pressure: 1.12—1.3Mpa.

 

ⅲ、Roller diameter parameters:

★ Diameter of rubber roller: ¢269mm .
★ Diameter of fixed paste roller: ¢142mm.
★ Diameter of the paper roller: ¢110mm .

 

IV. Power motor parameters:

 

★ Active motor for glue roller: 3KW.
★ Rubber volume adjustment reducer: 250W.
★ Pressure roller gap adjustment motor: 250W.
★ Glue pump motor: 2.2KW.